Home - Knowledge - Details

Why You Diffuser Is Not Misting And Spitting

 Why You Diffuser Is Not Misting And Spitting

 

 

Diffusers are one of the most popular ways to add essential oils into your home. They're easy to use, and they can help you relax with some aromatherapy. However, if your diffuser isn't working properly, it's important that you know why this is happening so that you can get it fixed as soon as possible. Here are some common reasons why your diffuser may not be working:

 

Why Is There No Mist Coming Out Of My Diffuser?


The Diffuser Is Out Of Water

If the diffuser is out of the water, it won't mist. The diffuser should have a reservoir that holds enough water to cover the bottom of your diffuser. You should check this level by looking at the water level indicator on your diffuser or simply using a cup to see how much is left in there. When it gets low, replace some more!


The Unit Is Overloaded And Processing Too Much Water At Once

This is a very common mistake that many people make when using their diffusers, especially if you're new to the hobby. While it's true that your diffuser can be used with more than one drop of essential oil, it's also true that this will cause all sorts of problems with how your diffuser works.

If you're using too much water, then you'll end up with an overly diluted solution that won't have any effect on your room's smell or environment (and thus won't help you sleep).

If there are too many drops in one go-around, then they might not come out evenly throughout the entire room; instead, they'll stay concentrated in certain areas where air currents are strongest (elevators).


There Is Too Much Oil In The Water Ratio

The most common mistake that people make when using a diffuser is not using enough water. You see, oil diffusers are designed to work with specific amounts of water in their reservoir. If you add too much or too little, it can create clogs and other problems for your device.

It's best to start by adding just 15 drops per cup (at least) until you get used to how quickly the fragrance will spread throughout your room without causing any issues. Then add another 5-10 drops if necessary!


The Water Contains Too Much Mineral Content

It can be hard to tell when the water is mineralized. You may have a hard time telling if your water contains too much calcium or magnesium, but there are some ways that you can tell.

If you have a diffuser that uses a pump and an attachment for filling it with water, then this will be pretty easy: just test the liquid in question with a pH meter (or something similar).

The reading should be close to neutral-anything less than 7 means too much mineral content in your running water supply and might clog up your diffuser's pump over time. If it reads higher than 7 on average throughout each day or week, then consider switching out some parts of your home's plumbing system so they're less susceptible to clogging up due to high mineral content in them!

To reduce the number of minerals present within our circulating air streams before they enter our homes through faucets/sprinklers etc., we need only take measures like boiling off any excess moisture before storing leftovers overnight so no more mold forms underneath sinks after being cleaned out at night.

 

 

 

Send Inquiry

You Might Also Like